MotionDetection Class

MotionDetectionResult Class

Description
A class used to represent and retrieve data related to motion detected.

Syntax
Class MotionDetectionResult

Members

Public Constructors 
MotionDetectionResult::MotionDetectionResultConstructs a MotionDetectionResult object.
Public Methods 
MotionDetectionResult::xMinGet x coordinate of the top left corner of the bounding box containing the detected motion
MotionDetectionResult::xMaxGet x coordinate of the bottom right corner of the bounding box containing the detected motion
MotionDetectionResult::yMinGet y coordinate of the top left corner of the bounding box containing the detected motion
MotionDetectionResult::yMaxGet y coordinate of the bottom right corner of the bounding box containing the detected motion

MotionDetection Class

Description
A class used to retrieve data when motion is detected by comparing the RGB information of each image frame captured from the on-board camera sensor (JX-F37P).

Syntax
Class MotionDetection

Members

Public Constructors 
MotionDetection::MotionDetectionConstructs a MotionDetection object and set motion detection resolution.
Public Methods 
MotionDetection::configResolutionConfigure motion detection grid resolution.
MotionDetection::configVideoConfigure input video stream parameters.
MotionDetection::beginStart motion detection process on input video.
MotionDetection::endStop motion detection process on input video.
MotionDetection::setTriggerBlockCountSet the number of blocks to trigger motion detection output.
MotionDetection::setDetectionMaskSet a specific region in the video stream to enable motion detection.
MotionDetection::getResultGet motion detection results.
MotionDetection::setResultCallbackSet a callback function to receive and display motion detection results.
MotionDetection::getResultCountGet number of motion detection results.
MotionDetection::rowsGet currently configured number of rows for motion detection grid.
MotionDetection::colsGet currently configured number of columns for motion detection grid.

MotionDetectionResult::xMin

Description
Get x coordinate of the top left corner of the bounding box containing the detected motion.

Syntax
float xMin(void);

Parameters
NA

Returns
A float ranging from 0.00 to 1.00, with 0.00 indicating the left edge of the input video frame and 1.00 indicating the right edge of the input video frame.

Example Code
Example: LoopPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/LoopPostProcessing/LoopPostProcessing.ino)

Notes and Warnings
“NNMotionDetection.h” must be included to use the class function.

MotionDetectionResult::xMax

Description
Get x coordinate of the bottom right corner of the bounding box containing the detected motion.

Syntax
float xMax(void);

Parameters
NA

Returns
A float ranging from 0.00 to 1.00, with 0.00 indicating the left edge of the input video frame and 1.00 indicating the right edge of the input video frame.

Example Code
Example: LoopPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/LoopPostProcessing/LoopPostProcessing.ino)

Notes and Warnings
“NNMotionDetection.h” must be included to use the class function.

MotionDetectionResult::yMin

Description
Get y coordinate of the top left corner of the bounding box containing the detected motion.

Syntax
float yMin(void);

Parameters
NA

Returns
A float ranging from 0.00 to 1.00, with 0.00 indicating the left edge of the input video frame and 1.00 indicating the right edge of the input video frame.

Example Code
Example: LoopPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/LoopPostProcessing/LoopPostProcessing.ino)

Notes and Warnings
“NNMotionDetection.h” must be included to use the class function.

MotionDetectionResult::yMax

Description
Get y coordinate of the bottom right corner of the bounding box containing the detected motion.

Syntax
float yMax(void);

Parameters
NA

Returns
A float ranging from 0.00 to 1.00, with 0.00 indicating the left edge of the input video frame and 1.00 indicating the right edge of the input video frame.

Example Code
Example: LoopPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/LoopPostProcessing/LoopPostProcessing.ino)

Notes and Warnings
“NNMotionDetection.h” must be included to use the class function.

MotionDetection::MotionDetection

Description
Constructs a MotionDetection object and configure motion detection resolution.

Syntax
MotionDetection(uint8_t row, uint8_t col);

Parameters
row: Number of rows for motion detection grid resolution. Default value of 18. (Valid value: 18 or 32)
col: Number of columns for motion detection grid resolution. Default value of 32. (Valid value: 32)

Returns
NA

Example Code
Example: LoopPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/LoopPostProcessing/LoopPostProcessing.ino)

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::configResolution

Description
Configure motion detection resolution.

Syntax
void configResolution(uint8_t row, uint8_t col);

Parameters
row: Number of rows for motion detection grid resolution. Default value of 18. (Valid value, 18 or 32)
col: Number of columns for motion detection grid resolution. Default value of 32. (Valid value: 32)

Returns
NA

Example Code
NA

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::configVideo

Description
Configure input video stream parameters.

Syntax
void configVideo(VideoSetting& config);

Parameters
config: VideoSetting class object containing desired video configuration.

Returns
NA

Example Code
Example: LoopPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/LoopPostProcessing/LoopPostProcessing.ino)

Notes and Warnings
“MotionDetection.h” must be included to use the class function. For motion detection, the input video stream uses the RGB format, which is only available on video stream channel 3.

MotionDetection::begin

Description
Start motion detection process on input video.

Syntax
void begin(void);

Parameters
NA

Returns
NA

Example Code
Example: LoopPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/LoopPostProcessing/LoopPostProcessing.ino)

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::end

Description
Stop motion detection process on input video.

Syntax
void end(void);

Parameters
NA

Returns
NA

Example Code
NA

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::setTriggerBlockCount

Description
Set the number of blocks to trigger motion detection output.

Syntax
void setTriggerBlockCount(uint16_t count);

Parameters
count: Threshold number of blocks with motion.

Returns
NA

Example Code
NA

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::setDetectionMask

Description
Set a specific region in the motion detection grid to ignore motion.

Syntax
void setDetectionMask(char * mask);

Parameters
mask: a pointer to a char array containing the regions where motion detection is enabled or disabled. A value of 1 will enable motion detection for the grid region, a value of 0 will disable motion detection for the grid region.

Returns
NA

Example Code
NA

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::getResult

Description
Get motion detection results.

Syntax
MotionDetectionResult getResult(uint16_t index);
std::vector getResult(void);

Parameters
index: index of specific motion detection result to retrieve.

Returns
If no index is specified, the function returns all detected motions contained in a vector of MotionDetectionResult class objects.
If an index is specified, the function returns the specific detected motion contained in a MotionDetectionResult class object.

Example Code
Example: LoopPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/LoopPostProcessing/LoopPostProcessing.ino)

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::setResultCallback

Description
Set a callback function to receive and display motion detection results.

Syntax
void setResultCallback(void (*md_callback)(std::vector));

Parameters
md_callback: : A callback function that accepts a vector of MotionDetectionResult class objects as argument and returns void.

Returns
NA

Example Code
Example: CallbackPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/CallbackPostProcessing/CallbackPostProcessing.ino)

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::getResultCount

Description
Get number of motion detection results.

Syntax
uint16_t getResultCount(void);

Parameters
NA

Returns
The number of detected motions in the most recent set of results, as an unsigned integer.

Example Code
Example: CallbackPostProcessing
(https://github.com/ambiot/ambpro2_arduino/blob/dev/Arduino_package/hardware/libraries/Multimedia/examples/MotionDetection/CallbackPostProcessing/CallbackPostProcessing.ino)

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::rows

Description
Get currently configured number of rows for motion detection grid.

Syntax
uint8_t rows(void);

Parameters
NA

Returns
The number of rows in the motion detection grid, expressed as an unsigned integer.

Example Code
NA

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

MotionDetection::cols

Description
Get currently configured number of columns for motion detection grid.

Syntax
uint8_t cols(void);

Parameters
NA

Returns
The number of cols in the motion detection grid, expressed as an unsigned integer.

Example Code
NA

Notes and Warnings
“MotionDetection.h” must be included to use the class function.

请先确认已安装QQ通讯软体