OTAClass Class

OTAClass Class

Description
A class used for managing OTA update service on Ameba.

Syntax
class OTAClass

Members

Public Constructors 
The public constructor should not be used as this class is intended to be a singleton class.
Access member functions using the object instance named OTA.
Public Methods 
OTAClass::beginArduinoMdnsServiceInitialise the MDNS service for OTA.
OTAClass::endArduinoMdnsServiceStop the MDNS service for OTA.
OTAClass::beginLocalStart the local OTA service.
OTAClass::setOtaAddressSet the flash address to store the OTA image.
OTAClass::setRecoverPinSet the recovery pin which allows booting from the old image.

OTAClass::beginArduinoMdnsService

Description
Initialise MDNS service for OTA.

Syntax
int beginArduinoMdnsService(char *device_name, uint16_t port);

Parameters
device_name: device name to show on MDNS service.
port: port number for the OTA service.

Returns
This function returns 0 if MDNS service begin successfully else return -1.

Example Code
Example: ota_basic
(https://github.com/ambiot/amb1_arduino/blob/dev/Arduino_package/hardware/libraries/OTA/examples/ota_basic/ota_basic.ino)

Notes and Warnings
Configures and registers the MDNS service required for the Arduino IDE to discover and recognize Ameba OTA. “OTA.h” must be included to use the class function.

OTAClass::endArduinoMdnsService

Description
Stop the MDNS service for OTA.

Syntax
int endArduinoMdnsService(void);

Parameters
NA

Returns
NA

Example Code
NA

Notes and Warnings
“OTA.h” must be included to use the class function.

OTAClass::beginLocal

Description
Start the local OTA service.

Syntax
int beginLocal(uint16_t port, bool reboot_when_success);

Parameters
port: port number for the OTA service.
reboot_when_successs: reboot after OTA update is done. Default value: True.

Returns
This function returns 0 if local OTA service starts successfully, else returns -1.

Example Code
Example: ota_basic
(https://github.com/ambiot/amb1_arduino/blob/dev/Arduino_package/hardware/libraries/OTA/examples/ota_basic/ota_basic.ino)

Notes and Warnings
“OTA.h” must be included to use the class function.

OTAClass::setOtaAddress

Description
Set the flash address to store the OTA image.

Syntax
int setOtaAddress(uint32_t address);

Parameters
address: Flash address for storing the OTA image. Default OTA address is 0x80000.

Returns
NA

Example Code
Example: ota_basic
(https://github.com/ambiot/amb1_arduino/blob/dev/Arduino_package/hardware/libraries/OTA/examples/ota_basic/ota_basic.ino)

Notes and Warnings
“OTA.h” must be included to use the class function.

OTAClass::setRecoverPin

Description
Set the recovery pin which allows booting from the old image.

Syntax
Int setRecoverPin(uint32_t pin1, uint32_t pin2);

Parameters
pin1: PIN for recovery.
pin2: PIN for recovery, default = unused.

Returns
NA

Example Code
Example: ota_basic
(https://github.com/ambiot/amb1_arduino/blob/dev/Arduino_package/hardware/libraries/OTA/examples/ota_basic/ota_basic.ino)

Notes and Warnings
Connect recovery pin to 3.3V to boot from the old image. “OTA.h” must be included to use the class function.

Please confirm that QQ communication software is installed
請先確認已安裝QQ通訊軟體